Provides six XLR balanced outputs from PDC-2.6*, PDC-2.6P* or HDP3**. The ‘HD’ version uses CD servos to avoid the use of series capacitors, and uses late generation extremely high slew rate op-amps for an ‘open’ 3D sound with great resolution and unconstricted detail. Provides six XLR balanced outputs from PDC-2.6*, PDC-2.6P* or HDP3**. The ‘HD’ version uses CD servos to avoid the use of series capacitors, and uses late generation extremely high slew rate op-amps for an ‘open’ 3D sound with great resolution and unconstricted detail. Provides six XLR balanced outputs from PDC-2.6*, PDC-2.6P* or HDP3**. The ‘Transformer’ version uses six Jensen output transformers that provide complete galvanic isolation form ground noise, while providing excellent transparency. Provides three stereo XLR balanced outputs for PDC-2.6*, PDC-2.6P* or HDP3**. The digital output module provides three stereo AES/EBU outputs via three XLR connectors, while a fourth female XLR will accept an AES sync input that will asynchronously sync all digital outputs to the input clock reference up to 100kHz sample rate, regardless of the PDC’s input or processing sample rate. The unit also provides three stereo S/PDIF outputs via RCA connectors. *The PDC-2.6 and PDC-2.6P can accept one Balanced output module OR the Digital output module, but not both. Installation is required at time of PDC order.**The HDP3 can accept either of the three balanced analogue output modules and/or the Digital output module. Installation is preferable at time of HDP3 order. However in the case of the HDP3, output modules can be installed at a later date by removing rear-panel blanking panels.